how to use intel flash programming tool bios

Our history with Intel and AMD goes back to the early nineties of the previous millennium when we served the European Server and Single Board firmware developers with Intel emulation and JTAG debug tools. Logic Technology is one of few tools and software distributors listed as an active Intel Alliance Member. The clue is not in the BIOS version then, but in your hardware.Logic Technology – your partner in BIOS UEFI Bootloaders and firmware solutions If the problem persists with the new BIOS, then make a new thread about it and include all your hardware.

Anything drastically different (under a minute of flashing, or over 10 minutes of flashing) and the flashing didn't work, so you can abort and try with the next USB stick. It needs to flash for about 5-7 minutes and then it will reboot. You need to find a USB stick / pen drive that the board likes. In fact, the old and cheap USB sticks with small capacity seem to work the best for that method, read here or here. The Flash BIOS Button method is quite picky about the USB stick. With the PC off, press the Flash BIOS Button, and the LED starts flashing for about 5-7 minutes. Plug the USB flash drive that contains the MSI.ROM file into the Flash BIOS Port on the rear I/O panel.Ĥ. FAT32 formatting is a must for the USB flash drive.ģ. Rename the BIOS file to MSI.ROM, and save it to the root of your USB flash drive / USB stick (not in a subfolder). Download the latest BIOS file for your board and extract it.Ģ. The MSI PRO Z690-A DDR4 has a Flash BIOS Button, so just use that to update the BIOS:ġ. I.e: USB key root structure should looks: General instructions for USB key preparation within Windows for both versions:Īnd extract all contents over the USB key, Ĭopy/extract the folder structure As Is to the USB key. Then you can remove the USB key and reconnect the rest of your storages and turn it on] [when blind flashing is complete the PC will auto shutdown, Then turn on PC and wait auto flashing to start and finish automatically. then shutdown the PC,Īnd disconnect temporary any other storages except that USB key that will be used for flashing] Short instructions for for Blind Flashing: (It's useful when need to flash BIOS without display and performs auto flashing)įor Blind Flashing only: Forum UEFI Shell Flash tool Or use special version for Blind Flashing: Prepare an USB key and format it in FAT32 V1.13 Add extra support for ME FW Update for all MSI Z490 Series:

How to use intel flash programming tool bios